The machine will not fill with water, I have checked water supply which is ok. I suspected the solenoid valve which controls the water. I layed the machine on its back to expose the solenoid, selected a programme and switched on, the solenoid opened and the machine filled with water to the correct level. When I put the machine upright it does not fill?
Any ideas or help would be appreciated.

Terry, October 2009

blockage somewhere.if there is a pipe attached to the inlet water valve try removing it and blowing down it and see if it resets lockout

ck, October 2009

have you got the wast pipe on the dishwasher at least 22 inches high

pip, October 2009