My indesit dish washer has an code dose any one out there knows what is (A03). the www dont know but if you do PLEASE HELP.
allen.featherstone@ntlworld.com

Tracy, March 2006

I recently had this code (A13) come up on our dishwasher
It seems the problem with our dishwasher was a blue wire
Off at the back of the powder dispenser.
MAKE SHURE DISHWASHER IS UNPLUGED
I removed the 4 star screws at the top inside of the dish washer
Then very carefully pulled the front forward reconnected the the
Blue wire make sure, the other wire is connected as well
Then put the front back on and pronto it worked
I hope this helps someone……..

gazzman, June 2007

Hi

AO2 Error

The Error relates to the thermostat control . located thunderneath the drum of the Machine. The thermostat has to be touching the drum. This problem can start as the machine is in transit as it works loose. it needs to be wedged up to the drum.

Steve Ellis, January 2007

check out the full, ripped off details at
http://www.gb-online.co.uk/indesit-error.html

gary, April 2006

Help full Error Codes 4 indeset DE73?

A01 = Acquastop operated due to leak / overfill - machine drains until empty + lmin.

A02 = Heater Relay open circuit/short circuit or Thermistor or Safety T/Stat o/c or s/c or Element machine fills to Level Switch & Wash Pump runs.

A03 = Thermistor open circuit /short circuit - machine drains until Level Switch resets +1minute

A04 = Unable to sense/reach temperature in 70mins. - machine drains until Level Switch resets + lminute

A05 = Level Switch not resetting in within 3' 20" of drain commencing - machine drains until Level Switch resets +1 minute

A06 = Not used see also H20 at end

A07 = Wash pump Triac closed/open circuit - check that Drain Pump is not disconnected or Aquastop operated

A08 = Auxiliary Wash Pump Triac closedlopen circuit - check Wash Motor operation- machine drains until Level switch resets+30"

A09 = Main Wash Pump Triac closed/open circuit - cheek Wash Motor operation- machine drains until Level Switch resets+30"

A10 = Fill Solenoid valve Triac closedlopen circuit - check valve/operation - machine drains until Level Switch resets+30"

A11 = 1/2 load Solenoid Valve Triac or alternating Wash Motor action - check Solenoid Valve operation & alternating Motor action, replace Module if required - machine drains until Level Switch resets +30"

A12 = Relay with open circuit - check Heater, replace Module if required - machine drains until Level Switch resets+30"

A 13 = Dispenser Triac incorrect operation closed/open circuit - Wash Cycle completes but with Dispenser Lid notfunctioning correctly

H20 = Static 'Fill Time exceeding 6 minutes - cheek for blockages/low pressure

Ricky
March 2006

Anon, March 2006