Rover 75. VIN SARRJSLHCYM125953. Have the code but no instructions. How do I enter it? The unit is probably a Blaupunkt radio/tape integrated unit but has no AS button - unless AS refers to the button on the RHS? Please help

MGF, March 2010

1. Switch on ignition.
2. Switch on the radio, if turned off.
3. The display shows 'CODE'.
4. Press button BAND button longer than 3 seconds.
The display shows '10 _ _ _ _', which indicates that you have
ten attempts left at entering the correct PIN code.
5. Enter the PIN code with preset buttons 1, 2,3 and 4.

Press preset button 1 for first digit
Press preset button 2 for second digit
Press preset button 3 for third digit
Press preset button the middle round one for the forth digit.

6. Press button BAND longer than 3 seconds. After that, the
radio starts with operating.
Important:
After the 1st wrong entry of the code number, the display shows:
" 9 - - - - ".
After 10 seconds, the display shows:
" 9 S A F E ".
If you have entered a wrong code two times, 4 dashes will be
shown in the display for about 10 minutes together with the number
of remaining attempts to enter the code.
If you have entered a wrong code, do not turn the unit off until
"SAFE" and the number of remaining attempts for code entry
is shown in the display.
If you have entered a wrong code 10 times, the following appears
on the display:
" D E A L E R ".

hay88, March 2010