Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Kurt asked ... How can i mend my Aiwa HV-FX7700K?    |    Laetitia asked ... Toyota overlocker model 3400 D?    |    Click here to ask your question

How do I remove the Ford factory fitted 4500 EON RDS CD/Radio?

I simply have no idea where to start to try to remove this factory fitted device. Any help would be appreciated.
Dominic, December 2004
there are eight screws holding the facia on 2 down the side of glove box 2 underneath 2 insde the plastic flap by the steering wheel and 2 behind the rear window heater which you prise out gently with small screwdriver

Keith, January 2007
I found by removing the front fascia and using a flat head screw driver to jam down the gap holding the stereo in and with brute force sprising it out it finally released itself, worked a treat. This was the last resort after hours of delicatly trying to remove it before hand though. Only use this technique as a last resort.

sniper, February 2006
there are no holes to use the radio removal key. you need to somehow remove the dashboard, as after removing all the screws, there isn't a way of completley removing it to get enough room as the dash gets stuck on the heater controls, can't find a way of getting round it! any other ideas ????!!!!

Kev, December 2004
Not with the Ford stereo's they are custom designed for the dashboard, I know the old 4 hole trick and using a cut off coat hanger but you can't with these, it's properly integrated... I'm still waiting for a solution myself!!

John Horton, December 2004
you need a radio removal key! if not you have 4 holes on the front sides of the radio if you get 4 flat point screwdrivers that fit in the holes push them into the holes you should hear a click thats the retainer brackets opening you should be able to pop the stero out!

hands, December 2004
link Click here to see other fixes for Ford.