Cass asked ... Replacing full bulb housing unit in Neff oven?    |    Pádraig O Sabhain asked ... How to fix Kenwood Slimline Dishwasher KDW45X20 with a F1 Er?    |    keith asked ... How to reset after battery change?    |    Carol asked ... How to remove roller from lawnmower?    |    Ariana Orellana asked ... Code?    |    Click here to ask your question

Murray rider will crank but wont start?

My rider sat for a season,I put new gas in,new battery,new oil,new filter,new spark plug,,will turn over but will not start,,now hearing a popping sound while turning over,,what can I do to start it? We already put gas directly into carb didn't work,
Arvin, November 2006
I would think the popping sound might be a valve stuck open.

Rick, November 2006
Remove the spark plug, heat it witha blow lamp until its stopped smoking and is very hot (Not melting red hot !) then quickly screw it back in and crank the engine should fire. I think you will find the mixture is too rich, maybe caused by a stuck choke plunger or a build up of crystaline fuel in the carb. maybe clean the carb out and check the jets if you are uncussesful in getting it running correctly.

good luck steve

SB, November 2006
link Click here to see other fixes for Murray.