We have a zanussi built in oven, model no-ZDF290X. Initial problem was no heat, no light but red indicator on the control panel coming on. Replaced the element and bulb and oven heated up. Thought it was fixed but then it tripped and now no heat, no light and no red indicator light. I'm thinking it's the thermostat that's gone and it has tripped due to overheating. Questions are -
Is it likely to be the thermostat and if yes and I replace it is there a reset switch in the rear of the oven to alow it to be used again? Also, how do I gp about changing it out, are there any videos/instructions to follow and any areas I need to be mindful of. Hope you can help!
Cheers
Andy

Andy, February 2015

Also worth checking is that if any of the thermal switches have a press-to-reset button, rather than auto-reset

Fluff, February 2015

There ARE thermal cutouts on this oven. See here:

http://tinyurl.com/pknrwf8

I see there is a fanto keep the controls cool (Item 1 in the above diagram) - that may have failed and not cooling the controls

Main spares page here -

http://tinyurl.com/q3m59ky


It is probably a matter of following through logically but it may be worth contacting Ransoms for advice.

Fluff, February 2015