Cass asked ... Replacing full bulb housing unit in Neff oven?    |    Pádraig O Sabhain asked ... How to fix Kenwood Slimline Dishwasher KDW45X20 with a F1 Er?    |    keith asked ... How to reset after battery change?    |    Carol asked ... How to remove roller from lawnmower?    |    Ariana Orellana asked ... Code?    |    Click here to ask your question

How do I clear an airlock in my bathroom cold tap?

Hi,

Does anyone know how I can clear an airlock in my bathroom cold tap without being able to connect a hose to my kitchen mains tap? I don't have a garden hose fitment that fits onto my bathroom cold tap!!!!!!
Bryn, August 2007
I would NOT recommend using the vacuum cleaner method. Water and electricity are a rather lethal combination!

Can you borrow a suitable hose and fitting?

Peter, October 2007
I would NOT recommend using the vacuum cleaner method. Water and electricity are a rather lethal combination!

Can you borrow a suitable hose and fitting?

Peter, October 2007
I use two tecniques,

The first is to use the bath mixer tap, turn both on full and block the tap with the palm of my hand, it depends on your pressure if this will work

The alternative is to turn the cold on, and put the vacuum cleaner nozzle over it (very effective, if a tad messy)

anon, August 2007
thats already been said.

al, August 2007
try blowing down the tap with it open

bryan, August 2007
BLOW UP THE SPOUT.

HI-SPEC PLUMBING, August 2007