Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

Hotpoint TDC32 DEAD?

I replaced the motor in my tdc32p put the machine back together at 3am! fired it up and it all worked well except no heat.

The heat was fine before the motor change so i checked all connections to see if i had accidentally removed one, but no all wires are where they should be!

Then i put the machine back together again and hey presto the machine is dead no start or anything....... any ideas as i have 4 kids, a wife who now is not impressed with me at all! if i can get the power problem solved i think i can solve the heat problem as i have done that before.

have i tripped a reset switch somewhere?(no power)
i have checked the connection to the float and thats OK (heat problem)
stats were replaced last june (all 3 including door)
and yes i have checked the fuse in the wall plug!
Bill, November 2007
Fixed the power problem it was a broken wire which i must have snapped on reassembly. Thats what happens when you try to assemble stuff at 3.00am!!!

Bill, November 2007
link Click here to see other fixes for Hotpoint.