3 hours ago Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Jacky asked ... Miele Vacuum cleaner?    |    Ben asked ... Toyota Yaris French or Japanese?    |    Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Felix asked ... Hitachi vt-m70em?    |    Click here to ask your question

no spark just replace magneto, now what?

still no spark replace magneto, have B & S 11 hp Model #252417
Gary, November 2007
If it does have points, fit a Nova electronic unit (about £10 in UK). Takes 10 minutes, problem GONE. And you never have to get the flywheel off again either!

Phil Saunders, November 2007
Hi
Is this the newer briggs and stratton 11hp if so it as two elements to make it spark the flywheel with magnets on it and a coil. Make sure the flywheel especialy the magnets are clean and the pick ups on the coil are clean -if all ok and still no spark remove the wire in the middle of the coil this earths out the coil to make the mower stop and somtimes if you have a faulty ignition switch this can be permenaytly earthing out the coil causing no spark. If still no spark I cant see it being the flywheel so it must be a faulty coil.
Ps If its the older one with points its a bit more detailed let us know
Good luck

william, November 2007
is the gap between the magneto and flywheel too wide it should be about 10 thou

geoff, November 2007