My Tricity Bendix dh101 timer keeps stopping in various places, firstly the wash cycle then if advanced manually it stops at cold rinse and hot rinse although it seems to go through the drying cycle ok ( no heat in dishwasher when opened though). The element is reading 20 ohms and is not down to earth. Please help.
Product No. 911861046

Kevin, December 2007

Hi Kevin,

5 years after you post this I am having this exact problem. Could you advise where you bought the part from to cure the problem.

Thanks,

Chris, July 2012

I have now fixed this problem after further investigation i found the automatic overflow valve ( water inlet solenoid ) to be the fault, no reading across the coil. The timer was waiting for the water level. Hope this helps someone else

Kevin, December 2007