alarm has been atcivated. Internal siren and siren to front of the property has stopped however siren at the back continued. Remote key pad shows tamper fault.

External boxes, PIR's etc. and show no signs of tampering. Remote pads do not work, (keys do not operate). Power to main box has been removed and external siren to the back has stopped. Power on again but tamper LED still lit and key pad buttons still not working.

Mark, December 2007

Hi Mark, you will have to clear the tamper fault before you can reset the system to day mode, you can link out the tamper circuits one marked tamp and the other is the bell box link marked sab powering up should go back into alarm and after putting the code in should go to day (unset) mode

Rob, December 2007