The metal screw which allows me to clean the bottom of the generator is severely stuck due to limescale. I have tried everything to remove it i.e. hammer and 2pence...it bent the 2p. Can anyone help with a tip please? I don't want to replace it yet! Thanks

Lisa, December 2007

If i have had to remove anything that tight beforei get a large screw driver ( as big as you can get to fit the slot )and make sure it has a square shaft, get a long spanner that fits the shaft put the screw driver in the slot and attach the spanner at 90 degrees to the shaft and use the spanner as leverage

Mike Avery, January 2008

If i have had to remove anything that tight beforei get a large screw driver ( as big as you can get to fit the slot )and make sure it has a square shaft, get a long spanner that fits the shaft put the screw driver in the slot and attach the spanner at 90 degrees to the shaft and use the spanner as leverage

Mike Avery, January 2008