Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

Hotpoint Aquarius VTD00 Tumble Dryer?

hi my tumble dry is not getting hot only cold air coming out what could be the problem
theresa, December 2007
To check if thermostats are dud and you have no meter to check them...... pull terminals off thermostat and connect both terminals together with a temporary wire between them and switch on if thermostats are faulty the element should heat up...... had the same problem with mine .

sj, February 2011
hi you could have a problem with either the thermostats or the element, the thermostat and element are easy to get to if you remove the cover on the back of the machine you should see the element inside the cover all you will need to do is take the wires off the 2 small thermostats and test for continuity across each one if none then its dead and to test the element test for continuity across the rings be sure to turn off and unplug before starting if you need any help or parts i may be able to help further bladesy2005@btinternet.com

Darren, December 2007
link Click here to see other fixes for Hotpoint.