managed to get the casing of around steering wheel, disconected the wire going to switch but the switch wont budge, cant see any grub screws or anything any ideas

mikey_b, December 2007

I did this then my key snapped into the ignition ive been forced to use a screwdriver in my barrel and now that's worn away its sat on my drive for two days while my children have to get the bus in the snow because I can't get someone out to it til Monday I feel like joing wires together but would probably electrocute myself !!! One very frustrated mum :((((

Ann Wilson, February 2013

take care when re-fitting barrel, you will have to align it with locking mechanism [it should slide in quite easy!]

k, December 2007

hi to remove the switch you have to remove the ignition barrel first, turn the key to position 1 then theres a small hole in the top under the wiper switch, put a small screw driver in it and pull the barrel out, then on the ignition switch you have to squeeze the sides and slide it off

chris, December 2007