how do i replace the passenger side headlamp bulb on a 1999 toyota corolla, and are the bulbs used on the driver and passenger side the same type?

Mike Hall, December 2007

I just had to do this today. First, you must remove the battery on the driver's side or the fuse panel on the passenger side. Next, you unplug the headlight plug from the headlight assembly. You then remove the rubber boot from the back of the headlight. You should be able to see the wire clamp that is holding the bulb in place. Unhook the lower half of the clamp from the upper half, and then release the clamp by pushing in the top half and moving it up. It should easily open. Remove the old bulb and insert replacement. Make sure that the tabs on the replacement bulb line up with the slots on the headlight assembly. Replace wire clamp and fasten top first, then re-hook bottom. Replace boot. Re-attach plug. Replace battery or fuse panel. Done

Teachu2, November 2008

Just Check in behind the lights, there will be cords leading to the back of the lights. with a bit of luck anfd force the should unscrew and pull out.

Sam, January 2008