I picked the machine up used, and it works well, but every load I do will stop and start beeping before the whole wash cycle completes -- when the 2 yellow lights are done. The manual says probably redistribute the clothes. No luck. What I do is turn it off and turn it back on. It starts where it left off and completes the cycle. The manual also said try unplugging and plug back in, no luck. Any ideas?

Paul T, December 2007

We had a similar problem, which we dealt with by advancing the cycle one. We eventually realized the filter screens in the hoses were clogged with grit. This is an easy item to check and fix. Of course there may be another issue with your particular problem.

-bc, December 2008

you need to replace the out of balance sensor

Martin, January 2008