Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

tumble dryer isn't letting any heat out?

My hotpoint Aquarius TDC 30 P condenser is not letting any heat out, everything else seems to be working the drum is still going round and there is no funny noises coming from it.
Lynne Middleton, December 2007
Hi Lynne,
My hoover dryer did the same, I found the thermal fuse had blown inside of the heater pack.
If you look around the back of your machine unscrew the cover you should see the heater element pack, if you remove this, inside there will be a small fuse usually has a yellow band around it, it will read open circuit on a meter you can get replacement ones from maplins, all you need to know is the value in degrees c printed on it. hope this helps

Andy, December 2007
link Click here to see other fixes for Hotpoint.