The old radio in our nissan serena 2.3 diesel is on its last legs, kids hve brought the wife a new one for christmass - i now have job of fitting it. just can not see how to remove old one without damageing anything

john durling, December 2007

When you find out how to get it out let me know I'm trying to get my radio out of nissan serena 2008 c25 let me no please 0224612064

Chris, June 2022

Can I have a look at the pictures plz

Lee, March 2021

Where are the 2 screws and how do I get the center part off

Lee, March 2021

Hello my Nissan Serena 2009 2.0l petral auto cnt get out the Japanese radio out

Lee, March 2021

now completed - here is the order of what i did - unit i was installing is a kenwood with the additional adaptor cable.
1) remove the two screws on the top edge of the fachia.
2) remove center console cover
this exposes the mounting screws for the radio
3) remove old radio and unplug all connections & arial
4) remove mounting brackets form old radio and save
5) check alignment of new radio with the old brackets, note you may need new fixing screws.
6) check all actions & options are fuctioning
7) re fix all fachias etc.

i have taken a couple of pics if interested

john durling, February 2008

Not had a chance to do it yet due to a family bereavement. And I had a quick look at the weekend, yes removing those two screws will allow it to unclip but I also found that you need to remove the console cover were the gear stick is to gains that extra ½ inch to get it off, and allow room to unplug the headlight adjusting switch. When I do it I will take some photos as I go. I could see the mounting screws on either side of the radio about 2 inches back form the face plate.

john durling, January 2008

John
I have a Vanette, but would think the solution to be the same for the Serena. Just above the radio are two screws. Remove these and pull the fascia forward and then up, which releases it from the clips you mention. There is no need to remove the centre console. The screws securing the radio, heater controls and in-dash tray are then visible and the radio can be unscrewed.

Andy, January 2008

Just a small update lookes like there are two clips at the bottom of the square cover that covers the radio, temp control units. on either side that you unclip by pushing up from below. Suspect it will help by removing the center console/gear stick cover to aid access. Will have to try it out

john durling, December 2007

John
I'm wondering the same thing myself - looks like the dash/console needs to be removed to get at the thing, but I haven't worked out how to do it. If you work out please let me know.....
Andy

Andy, December 2007