Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Click here to ask your question

Zanussi fridge freezer problem ZX57/3W?

Dear sir/madam, My fridge/freezer stopped working. I checked
it out and found the thermo U/s. I replaced the thermo and it
went ok but it started to freeze the products in the fridge and
the freezer was excessively cold. There are two stats inside
the freezer compartment, one at 10 degrees and the other at
40 degrees. They were both open circuit when measured when
the fridge was defrosted. Do you think this could be the problem as it stopped cooling the fridge but not the freezer.
Archie Thornton Glasgow. Scotland.
Archie Thornton, January 2008
Is it possible to fit a new door seal on a Zanussi ZX57-3W fridge freezer
Type B258866
Product No. 925886651
Ser No. 14400127

Donald, July 2012
there is an air sensor and an evaporator sensor on this type of fridge/freezer.the stats i think you are measuring as open circuit are there for the auto defrost so will be open circuit when defrosted.the air sensor and evaporaotor sensors are called ntc sensor i think and cost about £15 from main dealers

ck, January 2008
link Click here to see other fixes for Zanussi.