Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

Need free wiring diagram?

I need a wiring diagram for a Murray 30" with 11.5 hp briggs engine. Need to know how to rewire ignition & charging system.
Jerry Lynn, January 2008
Hi
Rewiring is easy depending on the system. If it's standard Briggs with electronic igniton, it's just a matter of getting power from the ignition switch to the connector on the coil located under the flywheel. (there's usally a black wire coming out from under the flywheel. that's the connector.)As for the charging system. There are 2 wires that come out from under the flywheel. One red, one white. The white one powers headlights if you have them. The red one charges the battery. Connecting it to the battery via the igniton switch will work

John K, January 2008
link Click here to see other fixes for Murray.