TJ asked ... Shredder won't turn off in between shredding documents?    |    Dir asked ... Melcom ST4500 Jaytech?    |    L Markle asked ... Heat resistant glue?    |    r bryant asked ... Radio will not play?    |    Eed asked ... Brother KR850?    |    Click here to ask your question

speedfight 2 100cc 200 model?

fuse blew on bike replaced fuse now bike wont start firing over ok but will not start. getting a spark and everything put in a new plug and had carb out and cleaned just wont start sounds like it wants to go but wont have it at all.could this be the automatic choke baffled
mike robinson, January 2008
to nick i i changed my jet on my speedy 100 and i couldnt get it to start remove the air box and try to start ur scoot with your hand covering the air intake on the carb after a few secs it shuld fire then jst replace air box and give it a cople of revs shuld work
k?

toby, April 2008
hay there i had the same problem on my speedfight 100 basically when you removed you carburettor it sounds like the float has become stuck this can happen easily by old oil or dirt give the float bowl(bottom of your carb) a good tap and fire im up it should go

hope i helped

toby, February 2008
my peugeout speed fight wrc 50 air cooled isnt workin properly i tried t chnage the main jet on it and reilized tht i had the wrong jet so i put it back together with the orginal air filter and jet and tried to start it but it woudnt start whn i did get it going it would be fine iintil i touched the throttle and would die or if i left it ticking other to long wich it never use to do so i brought a new carb and it still wasnt running write ps i brought a fairly new stock exaughts but still wasnt workin write the only thing i think it could be is the eletric choke i was hoping u could help me wiht my problem

nick, February 2008
link Click here to see other fixes for Speedfight 2.