home Fix label Household Appliances label_important Washing Machines category Samsung

Samsung washing machine?

Well same old problem, wont spin when there is a load in there comes up with error code e4 unbalanced load, every time without fail.
Checked brushes they seem ok, checked for blockages they seem ok. Belt seems fine.
Will spin on empty though?

alex, January 2008

home Fix label Household Appliances label_important Washing Machines category Samsungdone

hi got a Samsung smart wash 6kg and problem is that drum stopped turning and don't spin.the drive belt is still ok but makes a dull clinking nice when it tries to spin,any ideas.paul

paul james, May 2013

my error code indicates that the door is open yet its tightly closed so machine does not work

eunice, December 2010

This happened to my three week old Samsung washer. I sorted it by stopping the wash and adding a towel to balance the load. The washer seems to be excessively sensitive to imbalances in the load. I assume this is because it's not built to take a half load and so won't spin one garment or too heavy a load.

cfairc, September 2010

wont spin or drain out makes a loud noise also. we have a top loading machine also

Mel, August 2010

my washer gives E4 even when empty.
Any ideas or suggestions?

Sam, July 2010

My Samsung washing machine is 2 years old, and has started making a very loud vibration noise, it also pours out water from the bottom of the machine any idea guys?

andymc, January 2010

my front loader wont work on the last cycle, wont spin to empty the water out. The time stops at 8 minutes to go

russ, December 2009

How do you put the seal and wire back on the washing machine. Is the seal inverted and does the wire go underneath the seal?

jen, October 2009

My front load washer by smasung makes a noise while spinning

steve, August 2009

might be a problem with the suspension/dampers allowing too much drum movement. Dampers are hydraulic/air or friction type devices mounted onthe bottom of the drum to alleviate vertical oscillations. Could be worn, worn out or if friction sliders in need of lubrication. check out www.2ndwave.co.uk/manual.html;

dan, January 2008

Thanks I know thats what it means, but its doing that every time without fail, when it clearly isnt the case, lol!

The problem is that it wont spin! Have checked, brushes, belt, trapped items.

The motor is fine, and if i manually turn it it can spin a bit.

Thanks for your help

alex, January 2008

E4-Unbalanced load - Rearranged load - Remove/rearrange clothing

tony, January 2008

link Click here to see other fixes for Samsung.