home Fix label Vehicles label_important Motorcycles category Piaggio

how to unseize a twostroke piaggio nrg engine?

how to unseize a piaggio nrg engine due to overheating. engine wont turn over at all

mark, February 2008

home Fix label Vehicles label_important Motorcycles category Piaggiodone

i have a piaggo nrg and the kick start has ceasedup how do i fix it

kieron, March 2009

i have a piaggo nrs and it just wont start but evey thing works on it.

kieron, March 2009

what duz the throttle do that goes to the engine

gary, March 2009

burn the bike out

gary, March 2009

same thing happend to me mate, take the head off, spray bucket loads of WD40 in there, leave it 3/4 hours, give her a good kick and she should free up :)

Ben small, May 2008

just from what i know from rebuilding a DNa 50 engine

if you put the piston on one way, the bit where the rings meet catch on part of the inner cylinder airway , if you turn it upside down the rings wont catch at all ,

justremember this when fitting a new one to check this ,

jase, February 2008

This means that the piston, complete with its rings, has stuck fast to the cylinder barrel. Remove the cylinder head and gently try to prise the barrel upwards to free it. Once it decides to move, plug the crankcase mouth with some rag to stop any bits going down there. You'll need a rebore and new piston to put things right.

John, February 2008

link Click here to see other fixes for Piaggio.