how do i remove the rear light housing to enable me to replace the rear indicator bulb on a peugeot 206 'V' reg.

many thanks

richie, February 2008

Great work. followed your instructions and job done in no time. be carefull on with the red plastic lock as fragile and when unscrewing bolt joint will be tight and lifts of at an angle. reverse operation is easy just be do not lose the carpet lock as you will need this to put the carpet back

Nigelb, September 2009

how to replace service indicator bulb peugeout 206

harry, March 2009

You have to remove the carpet bihind the whole lamps unit,then you will see a plastic nut,remove the nut,unplug the wire unit by pressing and pull out,after you did this,there is a red plastic lock,press it down and from outside the car pull the hole unit out,once the hole lamp unit is out,there is a copper nut,untide the nut and seperate the part where the bulb holders are,thats about 7 minutes of work,hope it was of help.

John Zammit...Malta, February 2009

i need to know this too

Jack, March 2008