Our F&P DD603 has stopped working and gives a code F1 (or FI or FL). The lady and F&P told us this is the flood sensor and to dry out the drawers and leave them open. We did this for 36 hours but it still doesn't work. Any ideas?

Thanks

Simon McDonald, February 2008

We get this on our older F&P - We simply clean out the inner filters and it seems to work fine again!!! Our one has a stainless steel mesh on the floor of the dishwasher and once removed it exposes 2 more filters!

Steve, February 2008

Solved my own problem.

Take out the bottom drawer by pressing the catches on the side at the front. Lay it on its side so you can reach inside. Wipe the bottom dry. Locate the flood sensor which is a little raised inlet about 2/3rd from front and 2/3rd from left side. Blow this with a hairdryer set on warm for 10 minutes. Reassemble.

Worked for me. good luck

Simon McDonald, February 2008