I have a Zanussi washing machines that has the following fault
The machine is started on a program, the door switch locks the door, the machine bleeps to say the programme is finished eeven though it hasnt started washing , the machine unlocks door.Zanussi FX1265W 914792703

Robert Kemp, February 2008

if you have changed door interlock then it has blown the main pcb triac that drives the door interlock and you have to replace main pcb.they are not cheap!.this happens as there is no protection agains overcurrent into the door interlock.seems to be a common issue.sorry about bad news!!!!

ck, February 2008

the door lock has been replaced but still has fault

robert kemp, February 2008

door lock issues.could be a faulty door interlock or main pcb triac faulty.door lock is the cheaper part to try but sometimes when they fail they take the main control pcb triac down at the same time.its not easy to decide which it is without 1st replacing the door interlock but if after fitting new door interlock it does the same then you know its killed the main pcb

ck, February 2008

the end led flashes 4 times

robert kemp, February 2008

how many times does the leds on the display flash.this is a fault code.post answer and i will try help.start pause led and end led how many on each???

ck, February 2008