I turned off my system a few years back to disarm the beeping of the chimes on my doors, windows and doorbell. I want to turn them back on without using the alarm system, but I have no power to the keypad whatsoever. The fuse is fine, the breaker is on and i can't remember my master code and how I turned it off in the first place.

Michael Larson, February 2008

first thing to do is to install both leads to the battery then power the ac this is very important to do in this manner. the key pad will beep because it wants the time reset, *6 and the master alarm code which if new is 1234 if not good luck! then press 1, enter in military time the time of day and press the # key and the system should be normal.

E Faust, August 2008

HI Micheal
Does the red LED on your Detectors stil light up when activated?

Mark, March 2008

Rob,

I have the same issue as the 1st man. My key pad is dead. I just replaced the battery. How can I turn on my alarm?

KK, March 2008

Hi Michael I used to fit these have a manual somewhere, e mail me.
rpea52@aol.com
Rob

Rob, February 2008