GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

how can i fix my ford transit van, y plate?

had new starter motor fitted, still makes clicking sounds and will not start the engine. any possible indications on what it might be if not battery? thanks.
john, March 2008
Id agree with mick,juast add a new earth from battery to block.You can check if this is the fault by running a jumplead from the battery to the block first.

Tony, March 2008
on my diesel van the earth wire from the battery negative goes to a stud on the starter motor. this had a bad connection so i fitted another wire from the engine block to the battery negative terminal.the symptoms were of a flat battery. now it is ok. hope this helps.

mick, March 2008
If the starter solenoid is good and all leads clean and tight look for an earth lead from the engine to chassis and clean and tighten it,also if a lead runs from starter to alternator check joint at alternator.

Rich, March 2008
link Click here to see other fixes for Ford Transit.