home Fix label Garden Tools label_important Lawn Mowers category Briggs & Stratton

how to remove flywheel, old Briggs Stratton 3.5 hp lawnmower?

No spark, want to pull flywheel, but not sure what else to remove before using puller. Have top cover/shroud/recoil off, but then what do I remove? Must be a nut or something holding the flywheel on.

Rich, March 2008

home Fix label Garden Tools label_important Lawn Mowers category Briggs & Strattondone

there is a large nut & dished washer that needs to be removed first then install puller and tighten do not forget to lubricate (grease) where puller contacts shaft end a slight tap on puller bolt will help but do not use brute force this will work every time

jonathan waters, March 2008

Need to take thr recoil bearing housing off .....big pair of pliers or pipe wrench .....counter clock wise then pry it off carefully and there you are ..before tryin to pry it off spray some wd 40 or pb blaster on shaft .....

bg, March 2008

link Click here to see other fixes for Briggs & Stratton 3.5.

Fix Fault - Garden Tools

home label Garden Tools label_important Lawn Mowers

home Fix label Garden Tools label_important Lawn Mowers category Briggs & Stratton

how to remove flywheel, old Briggs Stratton 3.5 hp lawnmower?

I can answer this question...

how to remove flywheel, old Briggs Stratton 3.5 hp lawnmower?

I can answer this question ...

how to remove flywheel, old Briggs Stratton 3.5 hp lawnmower?

Tractor won't shift into gear?

Flymo 330 turboglide?

How to change rear roller on qualcast classic 35s?

How do I trace a Lawn Tractor starting problem?

Pull cord pulls out and retracts but engine does not turn ov?

No ignition light?

Forward belt pattern for a rt8 rear tine snapper tiller?

Bosch al3640 cv?