While installing a new radiator, the plumber accidently cut the wire to Personal Attack Button mounted on the wall inside the front door. I managed to locate the cable and take it from the partition wall thru' which it ran. I then removed the Panic button from this wall and reconnected it to the cable upstairs. However, I cannot switch the alarm on because the key pad continues to indicate a problem with the zone pertaining to the Panic Button. I'm not overly concerned to be without the Panic button but wish to have my house alarm operational again. I tried to isolate the problem zone according to the instructions on the keypad panel but this didn't work as the fault kept showing.

Declan Hanley, March 2008

you need to replace your panic attack button back & reconnect to the original cable which was cut

mr wire, July 2008