The overflow pipe got blocked and the machine was switched off till the blockage was cleared. When the machine was switched back on, all the water was emptied but the pump is still sucking and fault code F is now displayed on the display. How do I reset the machine and stop it trying to pump on none existant water?

Nige, March 2008

Thanks, wil give that a try Easter Monday :) it's integrated so I guess take off the front wooden plinth and have a look around

Nige, March 2008

take side panel off and you will find you have water in base, remove water, run with panel off and look for water leak .

www.asuds-appliance-spares.com, March 2008