GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

indicators,Ford Fiesta, 'H' reg 1990?

The indicators on my Fiesta have started to only occasionally flash, usually clicks but no light! - the hazards work fine as do the lights.

Do i need to replace the flasher unit? Is this tricky?
Mark, March 2008
Hi Nigel

I'm struggling in removing the upper plastic shroud - any tips?

Thanks in advance

Mark, April 2008
Thanks Nigel - really appreciated

Mark, March 2008
Mark, there are 4 screws holding the lower shroud on then two screws on the top shroud and two more from under the top shroud it helps to pull the red cap off the hazzard switch but you dont need to remove the steering wheel

nigel, March 2008
Oh thanks Nigel, just having a pain getting the top section of the steering column shroud off! Any hints to squeeze it off without taking the steering wheel off?

Thanks again,

Mark

Mark, March 2008
Hi Mark, from my memory they are all the same from a basic model up to a ghia

nigel, March 2008
Thanks Nigel, I've found a couple on Ebay.Does it matter that the car is just basic 1.1? I assume that the functions just won't work (imagine if they did) on a higher spec stalks?

Thanks again

Mark, March 2008
Hi Mark, a common fault on your car is the indicator stalk assembly easy to replace remove the shroud around the steering column and the stalk assembly is held in place by a single screw plenty of them for sale on ebay around £5

nigel, March 2008
link Click here to see other fixes for Ford Fiesta.