i have a white knight tumble dryer model no: 44AW on which i had to re-attach the circulation fan onto the motor shaft. in doing this i had to disconnect the rear cover to be able to get at the motor/fan assembly & foolishly did not make a drawing or note of how all the wiring was connected. therefore any help(namely a wiring diagram) in being able to re-connect all of the wiring correctly would be greatly appreciated.

andrew keeling, March 2008

Can any one get me a picture of the timer connections for a white knight 44aw please has I have just fitted a new timer and just want to make sure it's right

Andrew, September 2016

Hi the white knight tumble dryer started to blow cold air, I pressed the reset button and still no joy. I took off the back had alook and put the back back on, and now when I plug it in the mains it keeps on tripping out electric out I've cheaked that none of the terminals are touching, put it still tripping out still. Can you help me with this one please.

kevin b, February 2015

Diagram given on this site will fit the job nicely.
Thankyou for your help on this matter. I hope that the others who are lookiong for this wiring diagram (WHITE KNIGHT 44AW TUMBLE DRIER) diagrams also have found you.

Tim B., September 2011

wot is the wire connection on a thermo switch for a white knight (small tumble dryer)

keith jenner, August 2009

Hi Andrew, did you find a wiring diagram for the white knight 44aw, i have the same problem as you

martin smith, September 2008

the answer supplied by asuds@hotmail.co.uk is not what i was looking for due to the wiring on my machine being different to that given in the answer, sorry but many thanks for your reply. mine has a 4 terminal block where the mains lead goes into, wires from the main loom/timer, also from the elements & the red trip button.

andrew keeling, March 2008

note (blue to toc are the wires going to the stat with red button)

asuds@hotmail.co.uk, March 2008

lid off looking from front wires to terminal block first brown/ white second no wire third blue wire to resetable toc, forth blue wire to timer, fifth and sixth no wire, seventh black wire to thermo stat, eighth black/white to timer. wires to element from left to right first black to timer, second black to stat, third red to timer, forth no wire, fifth blue to toc.this is from memery on white knight 447v hope this helps.

asuds@hotmail.co.uk, March 2008