Mcculloch Timber Bear, Part of 610 family, My starter cord is not recoilling fully. I believe the starter spring has become weak. I would like to examine the spring to see if it needs adjustment or replacing. If it needs to be replace how do you do that. Starter springs can be tricky to handle. Any help would be appreciated.

Also after I have the saw running then shut it off to refuel. I have a hard time starting again. The saw runs well from a cold start. I had the coil changed out about 10 hrs ago. Any ideas?

JM Centeral Mass, March 2008

Thanks Steve

JM, April 2008

hi work on them all day take the side off and pull the cord all the way out and grab the cord from the inside and wind anty clock 1 turn that will do it ok

steve, March 2008