It will require two people. One to depress the pedal and other to open/close the bleeder at the end ot the system you worked on. This car has four lines comming from master cylinder. if your line is to a caliper you open the bleeder about 1 turn and then have the person push pedal down slowly, as the pedal is being depressed and fluid/air is comming out of the line, close it. then tell the pedal pusher to release pedal. repeat for rear wheel cylinders as well. bleed till oll visable air is out of lines. dont forget to re fill the master cylinder. if you get air in that ill have to post another answer for you. Good luck.
Donald, July 2005
