Hi I have an Aprilia Tuareg 125 with a rotax 123 engine,should the ignition timing be set to 1.84mm BTDC?,mine is set at 1.35 mm and i am not happy with the performance and I noticed power loss between 5000 and 6000 revs.the spring that holds the power valve seems to be very tall when i take the cover off and I was thinking that probably sombody pulled it,do you know how long this should be.Thks

Simon., April 2008

Hi I have a aprilia tuareg 125 don't know if it a ,wind or rally

need ignition barrel , rear shock, speedo cable

can't test it to see if still in good order

can anyone help

chris, October 2015

hi do you know what fork oil i need for a 1993 tuareg rally 125?

ash, November 2009

the spring length is 36.5mm loose
timming should be set to 1.30mm btdc to 2.03mm btdc my rs is set to 1.7

mike, August 2009

hello i am after some info on the tuareg can you help? i need a workshop maneul too in english#!!!

michael, April 2009

ay up dunno if uv fixed it yet but here is an online manual there is a section on timing it and a section on the power valve. just finished putting mine together, and it came in handy.
http://homepage.ntlworld.com/shawn.wombwell1/aprilia%20index.htm

Az Hattie, May 2008