Alan asked ... Problem with JCB 3CX transmission?    |    Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Click here to ask your question

What size main jet for a gilera dna 50 once tuned?

I have installed a malossi airfilter. Now when i give the bike full throttle the wheel does not more as if there is to much air getting in. I have tried a 60 main jet then a 70 does anyone know the exact jet size or anything that could be wrong?
Thomas, April 2008
david what do you mean by the fet?

Thomas, April 2008
fit a 90 main jet

adam, April 2008
I have tried the orignal filter the power is still there. should i try an 80 jet or is that to high?

Thomas, April 2008
use the main jet you had in to start with. you will see 3 cutouts in the fet at the top with a sir clip just move the clip from the middle cutouts down one

David, April 2008
Try the original filter on again to see if the power comes back....normally for a free flow air filter the main jet size goes up 10% but it is a gamble. Be warned - if your bike is running too lean it will overheat and you could burn a hole in the piston.

John, April 2008
link Click here to see other fixes for Gilera DNA.