Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

How can I get my mower to start?

16 hp briggs & stratton riding mower, model # 917.270680.
I have replaced the spark plug, the solenoid, ignition coil and it still won't start. I have jumped it with my car and still nothing.
Jim Sholl, April 2008
Check your primary fuse under the fuel tank. Its should be a 20 amp. Check power to the starter and solenoid. Spray electrical contact cleaner into the ignition switch keyhole and onto the plug on the backside of the switch. You have three relays to check, pull each one until you find the right one. Make sure that you have a good ground under your right rear fender above the tire. Clean the connection and seat it again. Thats a good start. Probably a ground.

slimdude, April 2008
link Click here to see other fixes for Briggs & Stratton.