My Creda tumble dryer keeps cutting out. If I wait for a minute, it will run again if I push the start button. However, a couple of minutes later it cuts out again.

I have ensured the water tray is empty, and that the fluff filters and condenser are clear, but still no joy.

Any help would be appreciated. Thanks

Michael, July 2004

no heat will be the thermastats as the back. cheap fix about 13.00 quid >easy to fix too. just make note of the one with green dot and note colour of connections.

sue from leeds, November 2012

when i press the start button it just buzzes

del hannaby, February 2012

My T630CW tumble dryer has stopped drying ( no heat ) Everything else works. How do I find out whats wrong or what items do I check first ?

Bob Harley, December 2009

My creda t630cw condenser dryer has done the same after two years. Using the information provided on this page I have fixed mine too.
Many Thanks

Nancy Paton, August 2004

Duncan

I managed to fix my tumble dryer - as you suggested, it was the relay.

The connections to the T630 relay are on two rows of 3 pins. Looking at the relay when it is fixed in place, the connections are:

Top Left - 2 x red wires
Top middle - Red & White/Blue
Top Right - Single Red

Bottom Left - Black & Grey
Bottom Middle - 2 x White/Blue
Bottom Right - White/Blue and Blue

Hope this helps

Michael, July 2004

Hi Michael,
We have the same problem with a creda condenser dryer T622CW model.
After a lot of searching we were told that 9 times out of ten it is the starter relay that is faulty, Which is behind the start button.
I ordered a new one ~£20, but forgot to take note of the 6 connections attached before I took the old one off! idiot!
I tried some trial and error last night but no good,
If you could tell me the connection order or better yet take a couple of photos and email them, I can try it out and tell you if it fixes the problem.
My email is dslade@platform8.com.
Note: take the top off first, we bust a few things on the front panel as we forced it off,idiot again!
Regards

Duncan Slade
01684 591591

Duncan Slade, July 2004