does the speedo on a dna 50 control the spark and the dip beam sidelights
Ann Parry, April 2011
1) Press and hold down the MODE and CLOCK buttons.
2) Turn on the ignition. The display will remain blank.
3)Wait until the display shows the letters "MPH". Then you can release the buttons.
4) Wait for the instruments to go through the normal start up and you will notice that it now displays MPH.
On the very early models the change could only be made within the first 6km
hope this helps. [you might need to use a screwdriver or other object to push the buttons as they are normally stiff]
GILERA [now piaggio etc] DEALER 1967 - 2008
gilera mech, May 2008
you can only do it when its new in the first 100 km,i used to work at a gilera dealer so i know for sure
adam actual motorcycle mechanic since 1982, April 2008
