home Fix label Household Appliances label_important Vacuum Cleaners category Dyson

dyson dc01 hose has no suction?

vacuum works when using on floor, but there is no suction from hose when using accessories, there does not seem to be any blockage

John Pepper, April 2008

home Fix label Household Appliances label_important Vacuum Cleaners category Dysondone

Possible wearing motor problem.

JACK, July 2022

I agee furst option worked a treat,thanks

Julie,chesterfield, May 2012

first suggestion worked a treat for me..thanks

Matt B, November 2009

I had this problem. On my model you can easily remove the bottom of the hose and the curved connector piece using the white clips (one of these becomes visible after removing the main bin. Press this and the bottom end of the hose will slide off the body of the machine). After clearing out half a brick, a pencil and two cats worth of fur it is working like a dream.

David. Sheffield, July 2009

had this problem and after several attempts to solve this issue I used a length of net curtain wire and pushed it up (from bottom rubber flap) the hose and out through the top came the offending plug of debris

John D, January 2009

remove the bin and put it to one side now take the top bin ass and lift it up till it comes off once you have done this strip the ass {it comes in four parts} and clean them once you have done this put it all together and it should work i know it sounds stupid but give it a try and you'll see
good luck

dave, April 2008

At the bottom of the hose area you'll find two rubber flaps - check that they aren't being held open by debris.

John, April 2008

link Click here to see other fixes for Dyson DC01.