The display on my Sharp ER A320 cash register is crooked and I want to straighten it. I took the smoke color plastic shield off, but can not see how to remove the top cover to get at the display?

Scott, April 2008

Hi.
There are four screws to remove.
1. Next to where the power cord enters the machine.
2. the front right foot of the printer. You will see a little cut-out in the circuit board to allow the screw to come up past it.
3. Back left corner. Inside at the back of the paper roll area. It may have a little leg of a spring under it.
4. Grounding wire. This is at the front of the printer. A small wire will be screwed to the drawer .

Hope this helps.

Mark, May 2008