home Fix label Security Systems label_important Home Alarm Systems

How can I use the zone function on our Gardtec 300 series alarm?

I would like to set our alarm with the 'zone' in our kitchen de-activated (lost manual for our Gardtec 300 many moons ago...). Is it a matter of inputing zones 1,2,3 etc before the code to see/hear if the appropriate zone de-activates? Any advice would be gratefully received.

Don McCrimmon, April 2008

home Fix label Security Systems label_important Home Alarm Systemsdone

the power light is flashing and I have no manual to help me is there any way to get a manual and have you any idea of this problem

kenneth hobson, July 2008

Hi Don,
You will need the engineer code! If you have it, enter the programming and you have to select the desired zone to be a part set zone, so this gets excluded when you part set it.
If you have not got the engineer code then thats another story.
Good Luck, Colin

Colin, April 2008

link Click here to see other fixes for Gardtec 300.

Fix Fault - Security Systems

home label Security Systems label_important Home Alarm Systems

home Fix label Security Systems label_important Home Alarm Systems

How can I use the zone function on our Gardtec 300 series alarm?

I can answer this question...

How can I use the zone function on our Gardtec 300 series alarm?

I can answer this question ...

How can I use the zone function on our Gardtec 300 series alarm?

SR system reset on Scantronic 9827 after total power failure?

Veritas 8?

Alarm?

How do I resolve the Bell Tamper?

Factory reset?

CEF AP28 alarm issue?

Veritas 8 alarm?

Home burglar alarm?