i need to change the front bumper on a 2000/2001 vauxhall corsa, i have bought a replica bumper that needs spraying, the new bumper is all one mould, could anyone advise me on how to remove the old bumper and how to fit the new one

sue cook, May 2008

Front Panelling, Remove and Install

A561510

Remove


1. Release left and right front wheel cut-out panel
• Unscrew 4x nuts (1)

• Pull out wheel cut-out panel slightly and fix in place





2. Undo front panelling at top
• Unscrew 3x bolt (2)


3. Release left and right wing protective liner
• Unscrew 4x bolts (1) and (3)


4. Undo front panelling at bottom
• Remove 3x body-bound rivets (4)




5. Remove front panelling
• Release panelling from guide rail at the side
Note: This requires a second person



Install

6. Put on front panelling
• Clip panelling into guide rail
Note: This requires a second person


7. Fasten front panelling at bottom
• Install 3x body-bound rivets


8. Attach left and right wing protective liner
• Tighten 4x bolt


9. Fasten front panelling at top
• Tighten 3x bolts


10. Fasten left and right front wheel cut-out panel
• Tighten 4x nuts

Mark, June 2008