Hi, I recently changed the starter on my P reg 306 and when the battery was reconnected the front light flash for about 30 seconds when i open the door, start the car and close the door.

I think this may have something to do with the alarm but there is no sound and i dont have the key for bit under the bonnet ( immobiliser possibly), there is also no keyfob.

The car starts fine when the code is entered but the lights flash, if i turn the lights on then they stop flashing but you can still hear the clicking noise as if the hazards are on, for about 30 seconds, the flashing stops and only returns if i open the door or turn the car of and start it again.

hope this makes sense and i hope someone can help, is there a sequence to reset this?

Gary - jesusjones13@hotmail.com

Gary, May 2008

did the trick on my 306 with the battrey
but it comes back when i open the doors again or start the car

eamonn, September 2011

Spanna

SPOT ON. Worked a treat. Turned on ignition, didn't enter 4 digit code for the imobiliser, simply disconnected neg side of battery, then connected it back up. Hay presto no more flashing head lights. Thanks again Spanna. Good old internet.

Julea, February 2010

switch on the ignition disconnect the battery and then reconnect the battery and that should sort it .
Yes that works!!!!

spencer, February 2009

i have the same problem. why has no one answered this. i can now take my car apart and put it back together in 30 seconds thanks to answers on web pages but no one can answer flashing light problem. some one please answer.
cheers

lee, October 2008

switch on the ignition disconnect the battery and then reconnect the battery and that should sort it .

spanna, May 2008