Hi my car is a 51 reg peugeot 206 cc the roof lost power last night as i was trying to open it, we managed to get it down but when i came to try and put it back on it continually beeped and their was no power in the roof at all, we manually managed to put it back up but the corners on the boot lid area have not locked in the correct position . I think because the roof didn't finish it's sequence this has confused the mechanism could you please send me some advice on how to reset thankyou. Tammy

Tammy, May 2008

why should the 30A fuse for the roof and windows keep blowing in the fuses box under steering wheel when you turn on ignition. neither roof or windows are working despite new switches which have been metered out ok

vivienne bayne, October 2016

Ty so much I will try tonight !! I called some repair place they came to my house but couldn't fix the problem with my car and then responded these cars are shit : ( so hopefully what u said will work thank you

Sad, October 2013

Please help I accidentally turned the car off while my bf was closing the roof ... So upset ! Tried to do the electrical way didn't work .. That i found on youtube Then tried to do it manually like in the handbook but there is no cord !!! I just got the car fixed have no money to get it checked out please helppme : (

Sad, September 2013

u have to undo the alan key again ,then munually pull forward the white locking on the hindge to lock it ,then retighten the alan key

glyn61, September 2013

needs reseting pug garage do it 40 quid

liam, May 2013

206cc roof reset

help, March 2013

go on you tube videos and type in 206cc roof reset it will come up in french but video is in english and a verry good help any other problems with car e mail me at another good site to try is peugeot206ccownersclub then goto repair list on left hand side and choose what needed its a big help ,cheers scott as iv had 2 pug 206cc riddeld with problems

scott davies, January 2010

hi I am also facing the same problem. I assumed you found the solution through another way.
If have could you please let me know

tom, January 2010

I am facing the same problem. As no answer was posted by now and a long time has passed, I assumed you found the solution through another way.
If I am right, please let me know how to resolve.
Thanks.

Jose Pires, April 2009