Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

how can i fix my kawasaki gpx600r?

my gpx600r wont start off the starter button but will start with a push.
david hill, May 2008
stand corrected on plug gap.wouldent be the first time ive found a starter robbing enough power from plugs on the button.concern was for high tension shorts in leads/caps ,had 1 once with same prob and light up the leads with shorts u could see at 6 foot away at night ,bumped fine,cured with ngk caps

caine, June 2008
Caine i think ur plug gap is way too small it should be about 0.6~0.8mm i think u r meaning imperial measure.
If the bike is starting from a push it tells u tha plugs are fine.

Debbi, May 2008
take out plugs put back in plug caps place metel of plug on cylenderhead spin motor u should see fat blueish sparks jump from center electrode to tang not from electrode tothe side of plug if ok gap plugs to .24mm replace.take oftank and in thedark spin motor and look for sparks jumping from caps/leads/coils to earth if so then replace caps/coilsif no spaks from coils plugs caps thenwireing fault

caine, May 2008
hows the battery?

Kimberly, May 2008
link Click here to see other fixes for Kawasaki.