This Samsung ER-350 electronic cash register was used only 3 months then stored for 4 years before plugging it in again. So, all programming was gone and everytime I try to do anything such as program a date is beeps and displays "E0".

I have tried the clearing process of holding the "Clear" button while plugging in and the unit does not print the "Initial RAM all Clear" message like the manual says it should.

I have also printed Z, PZ and Time Period reports thinking that would clear out something. They are printing out very strange with weird characters. Also, at one point, it looked like the date printed out August 2024 if that's any clue.

Maria DiMenna, June 2008

Hi. It will definitely need to be cleared. You can only store them for about 2 months before they lose everything. The symptoms you mention are to be expected. You will not be able to prgram it until you have done a RAM clear.

Make sure the key is in PGM mode.
When holding clear, make sure you hold it for long enough while turning the power on. Wait until it has printed before letting go.

If you need more help, please ask your question at www.eposwizard.co.uk

Mark, June 2008