2 hours ago Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

Belt change Hotpoint TDL30?

I have fitted the new belt around the body of the drier and refitted the front of the machine. What side do I need to remove to fit the belt to the pulley. I have lots of tools handy.
Terry, June 2008
Hi Terry,
this machine dosen't have a jockey pulley. The belt is an elastic type, it is tight on the drum and the motor pulley.
they are a pain in the bum to put on so good luck. i put the belt around the drim 1st then lay the machine on its back, LOOSEN the screws holding the motor to the base panel & stretch the belt over the motor pulley.
(hotpoint actually supply a specical tool for this repair.)

hope this helps

www.candmdomesticappliances.co.uk

paul, June 2008
link Click here to see other fixes for Hotpoint.