I need to know how the timing marks go on my 99 daewoo Nubira cdx 2.0L 16v. I do know there are two cam gears and they both say intake and exhaust but witch ones the left and right and where do they point? that lower main drive shaft pully has three dots on it, whitch way do they go?
any quality help would be greatly appreciated.
thanks,
Bill- williamvellia@sbcglobal.net

Bill, August 2005

i need the timing mark of nubira 99?

gilbert, April 2010

are you changing the bell or has it snapped.If not snapped put spanner on bottom pulley and turn untill marks on cam shafts meet in the middle then in time.Then take of bottom pulley to see mark if out by one or two teeth put nut back on then turn to mark

gazzamania, May 2008

are you changing the bell or has it snapped.If not snapped put spanner on bottom pulley and turn untill marks on cam shafts meet in the middle then in time.Then take of bottom pulley to see mark if out by one or two teeth put nut back on then turn to mark

gazzamania, May 2008

http://autorepair.about.com/library/faqs/bl259h.htm

you have to take the bottom pully off to see the mark

Edward cunningham, April 2007